Saturday, December 8, 2012

Here is my interpretation of H. P. Lovecraft, complete and replete with tentacular base.  The sculpture is 13" high.

I started off with a Monster Clay sculpture without the base, then a master cast was made out of a waste mold. I cut the waste mold off, so there is only one seam in the back, which was much easier to work with.  I added the urethane cast to the textured base, then sculpted the Elder Sign on his lapel, sloughed the tentacles over the edge a bit with Apoxie, and a few other clean up areas.  I then remolded the Master in a production pour case mold out of fiberglass and tin-based silicone (instead of the plaster bandage and silicone of the waste mold).  The mold is a 3 piece case allowing for a nice flat inset for the base stamp.  The actual production cast, of which I made 9 for prototyping for technique and material, is hand rotocast in multiple layers.

Sculpture in process.

Prototype out of waste mold, before Elder Sign and other elements.

Unpainted master HPL cast with Elder Sign and finished tentacle work, awaiting shroud for production mold.

Shroud added to wall, right before fiberglass case created and silicone poured.

Production mold, finished and ready.

Unused marble swirl prototype in production mold.

Different material prototypes in homemade lightbox before final marble choice.


I finalized the deal the other day by cutting up the original sculpture, melting it down, and using it for another design.  The ability to be able to release yourself from these pieces is very cathartic.  Sculpture for me is very therapeutic, and addictive.  I usually only work on the sculptures 1 hour a day or less, so it helps me release tension and do what I love.  Meditative.  Oh, and it's fitting that the HPL clay went to my new Cthulhu sculpture :)



Wednesday, February 22, 2012

Molding/Casting the Key of Cthulhu

OK, I don't have any good pictures of the mold, but I do have a few that show the cast in the mold.  The mold had to be designed so I could plug up the bottom for rotocasting, as well as have all the front tentacles stay as part of the one piece cast.  It was a very difficult procedure, and I did not have as much time as I would like to devote to it myself, so I brought in a friend and former student of mine, Yusuke Mori, to assist.  I would work with him on where the wall went, and he would get to work.  It turned out to be a 4 piece fiberglass case mold with tin based silicone for the inner structure of the mold.  There is a silicone plug in the base that pins in, and I unplug it and pour in new material for each layer of rotocasting.  I have different procedures and materials for the faux bronze vs. the faux marbles.

The Key of Cthulhu peeking out from its mold.
I had to do a similar procedure for the base, but less pieces (only 3).  It is a rotocast mold as well, with fiberglass and silicone.

Base right out of the cast.

I mix various powders into the translucent cold cast resin, along with pigments at various levels of rotocasting.  Also, ballast, to give that realistic hefty weight of either marble or bronze.  Then, of course, the final patina.  With the bronze, I use bronze metal powder in the cast with the pigments, then it's burnished, then a wash and dry patina added with final clear coat.  With the marble, I mix various swirl colors to achieve the marbled look with the marble dust, then the final orange patina and clear coat.  The base is a dry brush patina with clear coat.  The small side tentacles are cast in silicone cylinder molds and solid cast, which are then keyed into the actual bust itself.

Side tentacles, fresh out of their molds, unburnished.
Well, there is the whole process of the Key of Cthulhu!  Here are some final pics of the completed idol.

Key of Cthulhu, faux Marble.

Key of Cthulhu, faux bronze.

Tuesday, February 21, 2012

The Key of Cthulhu: Sculpture and Master

Hello there.  I'd like to discuss sculpture, passion and elder gods.  Well, we can discuss the particularities of elder gods later, but for now, I'd like to cover my passion, sculpture.   I've had a love of H.P. Lovecraft's works since I was a young boy, and in actuality he was a strong inspiration for me to get into the creature concept and creation field that I am in now.  I wanted to try and bring to life, give personality to, the indescribable monsters and gods he wrote about.  I didn't know it at the time, but his writing is alot like sculpture.  You only have a brief time to get the reader/viewer interested in your creation.  You have to grab them, let them look deep into the soul of your universe, and see life.  With sculpting, at least with the part of it that I love so much, it's in the eyes and expression, that people lock onto and feel the life of the character.  Hence my fascination with Cthulhu.  He is one of the most iconic creations of Lovecraft, besides the Necronomicon, and being a big Dungeons and Dragon gamer in my youth, he embodied my love of horror and fantasy, all wrapped up in one rather large, disgusting package!  I didn't want to turn him into a blobular mass, or something that people couldn't relate to, however.  I'll save that for another sculpture I'm working on at the moment.  No, with this one I wanted to have people relate, so that meant I had to inject some humanity into his design.  Since people will be viewing it, I wanted people to relate, therefore I needed to have some depth to his appearance.  Since I couldn't have people relate to the tentacles, the only thing left, since there was no more of a human element to the expressions and anatomy left undisturbed by the alien/octopus hybrid, were the eyes.  They were they key.  I wanted to put mystery, alien intelligence and thought into those eyes, while keeping the whole design flowing in the right direction.

OK, here are some of my thoughts about the Key.  I mentioned in my previous post some of my thought process going into the design of Cthulhu.  I'd like to post some of the process photos here to give some balance to the thoughts, so you can see some of steps that I had to take to get to the finished statue.  Starting off, I sculpted the tentacles with a free flowing feel, but they weren't originally made to be molded, due to undercuts and the way the mold would have to open in order to be cast properly.  Once the decision was made to make the sculpture a cast, I had to compromise some of my artistic leanings for practical choices, and the main one was the shape and direction of the tentacles.  Here is what the sculpture looked like before I changed the tentacles.
Key of Cthulhu sculpt with unmodified tentacles.
So, a decision had to be made about what to do next.  I decided that I would make a master copy, and then go from there.  I could still make a cast of the sculpture with the tentacles as-is, but I could not mass produce them that way.  What I did was cut off a few of the offending tentacles, do a brush-up silicone mold, and then re-assemble the final cast, and decide from there.  I was going to do that anyway due to some finish work I could easily do in resin vs. clay.  Here are the lines where I decided to cut some of the main tentacles.
Key of Cthulhu with the dotted lines showing where the tentacles will be cut to be reattached later.

Here is the master of the Key, just out of the mold with the reattached tentacles, painted white, originally, just to utilize the auto body primer I had on hand.   The tentacles are still in the formation of the original sculpture, and you can see the temporary pins holding in the small side tentacles.




Here is the master cast, with the tentacles reattached and on the pedestal for the base sculpt.  I sprayed black primer on top of the white, which helped me see how far I was sanding down with the steel wool.  This is after I changed the tentacular positioning as well.  No longer does the one tentacle wrap under the main one, and I adjusted a few more to allow for easier molding. 



Next post: molding and casting.